Design & Technique

Upcoming events

    • 05 Aug 2015
    • 6:00 PM
    • 02 Sep 2015
    • 9:00 PM
    • MakerPlace workshop
    • 14

    This class will teach the ancient art of fusing glass to metal. It will be taught with a contemporary approach to the materials and process. Creative projects may include jewelry, wall art, bowls, etc. Techniques to be explored will be stencils, screen prints, wet packing, cloisonné, liquid enamels, etching and other techniques suitable to the materials. Beginning, intermediate and advanced students are welcome.

    This course will consist of 5 sessions, approximately 3 hours each, taught over 5 consecutive weeks. 

    Class dates are as follows:
    August 5, 12, 19, 26 and September 2nd.
    Classes will begin at 6pm and end at 9pm.

    Please note that there is also a one time $20 materials 
    fee that is mandatory for all class attendees. 
    **Closed toe shoes are required**
    • 08 Aug 2015
    • 1:00 PM
    • 09 Aug 2015
    • 3:30 PM
    • MakerPlace Wood Shop
    • 2
            

    Intermediate Woodworking will expand the student's knowledge of wood shop safety and the proper setup and use of specific woodworking machinery. Machines covered in this class include the joiner, table saw, planer and router. 
     
    During this hands-on, two day class students will create their very own wood cutting board while learning effective glue up methods, proper sanding techniques, and efficient router setup. 

    A $25 materials fee covers each student's wood and consumables for their take-home project.

    This is a two day course held on August 8th and August 9th from 1 PM to 3:30 PM.

    For students interested in learning additional woodworking techniques, MakerPlace offers Intermediate Woodworking Part 2: End Grain Cutting Boards as an extension to the Part 1 course. Part 2 is a one day course that teaches students how to convert their face grain cutting boards into end grain cutting boards. 

    Prerequisite: Prior completion of Intro to Wood Shop Power Tools is highly encouraged.

    **Closed-toe shoes are a requirement**

    **Please wear appropriate shop attire: 
    Pants preferred, no loose fitting garments, hair tied back if shoulder length or longer.**

    • 09 Aug 2015
    • 12:00 PM - 4:00 PM
    • MakerPlace Craft Room
    • 5
    Screen printing basics. Make stuff! Print on T-shirts, signs, posters and just about anything you can think of.  Vinyl stencil is a quick easy way to get exposure to t-shirt printing using vector art.  You will learn to use the cutter/plotter, transfer vinyl stickers, and print shirts all in one class.  We will discuss tools, techniques and media.  Take advantage of hands-on projects and small class sizes. Get detailed understanding of what screen printing is and how to apply it to your project.  At Maker Place we have everything you need to make professional prints on t-shirts. In this class, we will learn to print with vinyl stencils. 
    Closed-toe shoes are required. 
    A small materials fee covers each student's pigments, ink and screens. 
    Students should bring in their own Tshirt that they would like to print on. (It wouldn't hurt to have a backup too.)
    Due to the extensive amount of information covered in this course, the instructor will provide a demo design for students to practice with. 
    • 10 Aug 2015
    • 6:30 PM - 9:00 PM
    • MakerPlace Classroom
    • 5

    This course is intended for students who have little or no 3-dimensional modeling experience, but want to learn the basics to eventually create 3D objects via rapid prototyping on the 3D printer. Topics covered include learning the SketchUp interface, drawing in SketchUp, drawing shapes and creating geometry using SketchUp tools. The emphasis of this course is to learn the basics of SketchUp and teach students how to design simple 3D models of real objects. 


    **Closed-toe shoes are required as the classroom is located through the shop**

    • 11 Aug 2015
    • 6:30 PM - 8:30 PM
    • MakerPlace Classroom
    • 2
    This class offers an introduction to the software needed to successfully operate the CNC machine (Vcarve Pro). This course will outline the workflow of taking your vector designs through tool-pathing software to generate g-code that can be used by the machine to cut student's project. Students will learn how to create designs for the CNC, basic toolpaths, cutting parameters, proper tool selection, and machining strategies. 
    The VCarve class is a prerequisite for the CNC Router and the Tormach CNC Mill.

    Suggested Prerequisites for this Course: It is strongly recommended that students have a basic knowledge of how to create vector-based files (i.e- .ai, .eps, .dxf, .dwg, .cdr file extensions) before taking this class. If these file types are foreign to you, it is highly recommended that you attend the Intro to 2D Vector class before attending this class. 

    **Closed-toe shoes are required as the classroom is located though the shop**
    • 16 Aug 2015
    • 1:00 PM - 3:00 PM
    • MakerPlace Wood Shop
    • 4
            
    This is an optional, follow-up course that introduces students to additional woodworking techniques to convert their face grain cutting board into an end grain cutting board. While face grain boards can last through years of use, the benefits of an end grain cutting board are numerous- they will last a lifetime, the won't dull knife edges, and they are virtually scratch resistant. This class covers additional table saw and router techniques which will prove valuable in future woodworking endeavors.
    A $10 materials fee covers each student's consumables for this course. 

    Prerequisite: Prior completion of Intermediate Wood Working Part 1 is REQUIRED for this course. Students will use the face grain cutting boards they've built in the Intermediate Wood Working Part 1 and convert them into end grain cutting boards. 

    **Closed-toe shoes are a requirement**

    **Please wear appropriate shop attire: 
    Pants preferred, no loose fitting garments, hair tied back if shoulder length or longer.**
    • 17 Aug 2015
    • 6:30 PM - 8:30 PM
    • MakerPlace Classroom
    • 8

    This class gives students a comprehensive introduction to 2D vector-based graphics using the popular CorelDraw software. This class will give students the basic knowledge to start creating 2D vector files for use with the laser cutters, the CNC router, and the CNC mill. In order to make the most of the CNC Router/Mill and Laser BOS classes, 2D Vector Graphics is recommended as a prerequisite for beginning users.

    MakerPlace PC laptops with the CorelDraw software installed will be available for students during the class.

    **Closed-toe shoes are required as the classroom is located through the shop**

    • 22 Aug 2015
    • 1:00 PM
    • 23 Aug 2015
    • 3:30 PM
    • MakerPlace Wood Shop
    • 4
            

    Intermediate Woodworking will expand the student's knowledge of wood shop safety and the proper setup and use of specific woodworking machinery. Machines covered in this class include the joiner, table saw, planer and router. 
     
    During this hands-on, two day class students will create their very own wood cutting board while learning effective glue up methods, proper sanding techniques, and efficient router setup. 

    A $25 materials fee covers each student's wood and consumables for their take-home project.

    This is a two day course held on August 22nd and August 23rd from 1 PM to 3:30 PM.

    For students interested in learning additional woodworking techniques, MakerPlace offers Intermediate Woodworking Part 2: End Grain Cutting Boards as an extension to the Part 1 course. Part 2 is a one day course that teaches students how to convert their face grain cutting boards into end grain cutting boards. 

    Prerequisite: Prior completion of Intro to Wood Shop Power Tools is highly encouraged.

    **Closed-toe shoes are a requirement**

    **Please wear appropriate shop attire: 
    Pants preferred, no loose fitting garments, hair tied back if shoulder length or longer.**

    • 23 Aug 2015
    • 12:00 PM - 4:00 PM
    • MakerPlace Craft Room
    • 5
    Advanced Screen PrintingMult-icolor registration. Want to learn more? Photo emulsion is the industry standard for multi-color screen printing. It is the best way to control multi-color images and it lets you work in any art format. Take advantage of hands on projects and small class sizes. Maker Place has everything you need to coat, mount, and burn screens. It is easy and fun! Save money and do it yourself. This class is intended to build upon the knowledge, gained in “Screen Printing Basics”. It is highly recommended that you have an understanding of screens, inks, and techniques before taking this class.  
    Closed-toe shoes are a requirement.
    A small materials fee covers each student's pigments, ink and screens.
    Students should bring in their own Tshirt that they would like to print on. (It wouldn't hurt to have a backup too.)
    Due to the extensive amount of information covered in this course, the instructor will provide a demo design for students to practice with. 
    • 24 Aug 2015
    • 6:30 PM - 9:00 PM
    • MakerPlace Classroom
    • 8

    This course is intended for students who have little or no 3-dimensional modeling experience, but want to learn the basics to eventually create 3D objects via rapid prototyping on the 3D printer. Topics covered include learning the SketchUp interface, drawing in SketchUp, drawing shapes and creating geometry using SketchUp tools. The emphasis of this course is to learn the basics of SketchUp and teach students how to design simple 3D models of real objects. 


    **Closed-toe shoes are required as the classroom is located through the shop**

    • 25 Aug 2015
    • 6:30 PM - 8:30 PM
    • MakerPlace Classroom
    • 8
    This class offers an introduction to the software needed to successfully operate the CNC machine (Vcarve Pro). This course will outline the workflow of taking your vector designs through tool-pathing software to generate g-code that can be used by the machine to cut student's project. Students will learn how to create designs for the CNC, basic toolpaths, cutting parameters, proper tool selection, and machining strategies. 
    The VCarve class is a prerequisite for the CNC Router and the Tormach CNC Mill.

    Suggested Prerequisites for this Course: It is strongly recommended that students have a basic knowledge of how to create vector-based files (i.e- .ai, .eps, .dxf, .dwg, .cdr file extensions) before taking this class. If these file types are foreign to you, it is highly recommended that you attend the Intro to 2D Vector class before attending this class. 

    **Closed-toe shoes are required as the classroom is located though the shop**
    • 30 Aug 2015
    • 10:00 AM - 1:00 PM
    • MakerPlace Welding Area
    • 6
    Copper Bowl Forming will teach each student how to form their own copper bowl with readily available tools and equipment using the sinking method. 
    The class will consist of both lecture and demonstration of the bowl forming method. It will include methods on forming copper, how to anneal copper, how to clean copper, general safety guidelines and much more!
    Each student will have their own workstation for rough forming the bowl. At the end of the workshop each student will have finished their own copper bowl and also have the knowledge and ability to continue on their own to form copper using the sinking method. 

    A $5 materials fee covers each student’s copper. 

    **Closed-toe shoes are required**
    • 30 Aug 2015
    • 1:00 PM - 3:00 PM
    • MakerPlace Wood Shop
    • 4
            
    This is an optional, follow-up course that introduces students to additional woodworking techniques to convert their face grain cutting board into an end grain cutting board. While face grain boards can last through years of use, the benefits of an end grain cutting board are numerous- they will last a lifetime, the won't dull knife edges, and they are virtually scratch resistant. This class covers additional table saw and router techniques which will prove valuable in future woodworking endeavors.
    A $10 materials fee covers each student's consumables for this course. 

    Prerequisite: Prior completion of Intermediate Wood Working Part 1 is REQUIRED for this course. Students will use the face grain cutting boards they've built in the Intermediate Wood Working Part 1 and convert them into end grain cutting boards. 

    **Closed-toe shoes are a requirement**

    **Please wear appropriate shop attire: 
    Pants preferred, no loose fitting garments, hair tied back if shoulder length or longer.**
    • 31 Aug 2015
    • 6:30 PM - 8:30 PM
    • MakerPlace Classroom
    • 10

    This class gives students a comprehensive introduction to 2D vector-based graphics using the popular CorelDraw software. This class will give students the basic knowledge to start creating 2D vector files for use with the laser cutters, the CNC router, and the CNC mill. In order to make the most of the CNC Router/Mill and Laser BOS classes, 2D Vector Graphics is recommended as a prerequisite for beginning users.

    MakerPlace PC laptops with the CorelDraw software installed will be available for students during the class.

    **Closed-toe shoes are required as the classroom is located through the shop**

    • 08 Sep 2015
    • 6:30 PM - 8:30 PM
    • MakerPlace Classroom
    • 8
    This class offers an introduction to the software needed to successfully operate the CNC machine (Vcarve Pro). This course will outline the workflow of taking your vector designs through tool-pathing software to generate g-code that can be used by the machine to cut student's project. Students will learn how to create designs for the CNC, basic toolpaths, cutting parameters, proper tool selection, and machining strategies. 
    The VCarve class is a prerequisite for the CNC Router and the Tormach CNC Mill.

    Suggested Prerequisites for this Course: It is strongly recommended that students have a basic knowledge of how to create vector-based files (i.e- .ai, .eps, .dxf, .dwg, .cdr file extensions) before taking this class. If these file types are foreign to you, it is highly recommended that you attend the Intro to 2D Vector class before attending this class. 

    **Closed-toe shoes are required as the classroom is located though the shop**
    • 09 Sep 2015
    • 6:00 PM
    • 07 Oct 2015
    • 9:00 PM
    • MakerPlace workshop
    • 15

    This class will teach the ancient art of fusing glass to metal. It will be taught with a contemporary approach to the materials and process. Creative projects may include jewelry, wall art, bowls, etc. Techniques to be explored will be stencils, screen prints, wet packing, cloisonné, liquid enamels, etching and other techniques suitable to the materials. Beginning, intermediate and advanced students are welcome.

    This course will consist of 5 sessions, approximately 3 hours each, taught over 5 consecutive weeks. 

    Class dates are as follows:
    Sept. 9, 16, 23, 30 and Oct. 7
    Classes will begin at 6pm and end at 9pm.

    Please note that there is also a one time $20 materials 
    fee that is mandatory for all class attendees. 
    **Closed toe shoes are required**
    • 14 Sep 2015
    • 6:30 PM - 8:30 PM
    • MakerPlace Classroom
    • 10

    This class gives students a comprehensive introduction to 2D vector-based graphics using the popular CorelDraw software. This class will give students the basic knowledge to start creating 2D vector files for use with the laser cutters, the CNC router, and the CNC mill. In order to make the most of the CNC Router/Mill and Laser BOS classes, 2D Vector Graphics is recommended as a prerequisite for beginning users.

    MakerPlace PC laptops with the CorelDraw software installed will be available for students during the class.

    **Closed-toe shoes are required as the classroom is located through the shop**

    • 19 Sep 2015
    • 1:00 PM
    • 20 Sep 2015
    • 3:30 PM
    • MakerPlace Wood Shop
    • 4
            

    Intermediate Woodworking will expand the student's knowledge of wood shop safety and the proper setup and use of specific woodworking machinery. Machines covered in this class include the joiner, table saw, planer and router. 
     
    During this hands-on, two day class students will create their very own wood cutting board while learning effective glue up methods, proper sanding techniques, and efficient router setup. 

    A $25 materials fee covers each student's wood and consumables for their take-home project.

    This is a two day course held on September 19th and 20th from 1 PM to 3:30 PM.

    For students interested in learning additional woodworking techniques, MakerPlace offers Intermediate Woodworking Part 2: End Grain Cutting Boards as an extension to the Part 1 course. Part 2 is a one day course that teaches students how to convert their face grain cutting boards into end grain cutting boards. 

    Prerequisite: Prior completion of Intro to Wood Shop Power Tools is highly encouraged.

    **Closed-toe shoes are a requirement**

    **Please wear appropriate shop attire: 
    Pants preferred, no loose fitting garments, hair tied back if shoulder length or longer.**

    • 20 Sep 2015
    • 12:00 PM - 4:00 PM
    • MakerPlace Craft Room
    • 6
    Screen printing basics. Make stuff! Print on T-shirts, signs, posters and just about anything you can think of.  Vinyl stencil is a quick easy way to get exposure to t-shirt printing using vector art.  You will learn to use the cutter/plotter, transfer vinyl stickers, and print shirts all in one class.  We will discuss tools, techniques and media.  Take advantage of hands-on projects and small class sizes. Get detailed understanding of what screen printing is and how to apply it to your project.  At Maker Place we have everything you need to make professional prints on t-shirts. In this class, we will learn to print with vinyl stencils. 
    Closed-toe shoes are required. 
    A small materials fee covers each student's pigments, ink and screens. 
    Students should bring in their own Tshirt that they would like to print on. (It wouldn't hurt to have a backup too.)
    Due to the extensive amount of information covered in this course, the instructor will provide a demo design for students to practice with. 
    • 21 Sep 2015
    • 6:30 PM - 9:00 PM
    • MakerPlace Classroom
    • 8

    This course is intended for students who have little or no 3-dimensional modeling experience, but want to learn the basics to eventually create 3D objects via rapid prototyping on the 3D printer. Topics covered include learning the SketchUp interface, drawing in SketchUp, drawing shapes and creating geometry using SketchUp tools. The emphasis of this course is to learn the basics of SketchUp and teach students how to design simple 3D models of real objects. 


    **Closed-toe shoes are required as the classroom is located through the shop**

    • 22 Sep 2015
    • 6:30 PM - 8:30 PM
    • MakerPlace Classroom
    • 8
    This class offers an introduction to the software needed to successfully operate the CNC machine (Vcarve Pro). This course will outline the workflow of taking your vector designs through tool-pathing software to generate g-code that can be used by the machine to cut student's project. Students will learn how to create designs for the CNC, basic toolpaths, cutting parameters, proper tool selection, and machining strategies. 
    The VCarve class is a prerequisite for the CNC Router and the Tormach CNC Mill.

    Suggested Prerequisites for this Course: It is strongly recommended that students have a basic knowledge of how to create vector-based files (i.e- .ai, .eps, .dxf, .dwg, .cdr file extensions) before taking this class. If these file types are foreign to you, it is highly recommended that you attend the Intro to 2D Vector class before attending this class. 

    **Closed-toe shoes are required as the classroom is located though the shop**
    • 27 Sep 2015
    • 1:00 PM - 3:00 PM
    • MakerPlace Wood Shop
    • 4
            
    This is an optional, follow-up course that introduces students to additional woodworking techniques to convert their face grain cutting board into an end grain cutting board. While face grain boards can last through years of use, the benefits of an end grain cutting board are numerous- they will last a lifetime, the won't dull knife edges, and they are virtually scratch resistant. This class covers additional table saw and router techniques which will prove valuable in future woodworking endeavors.
    A $10 materials fee covers each student's consumables for this course. 

    Prerequisite: Prior completion of Intermediate Wood Working Part 1 is REQUIRED for this course. Students will use the face grain cutting boards they've built in the Intermediate Wood Working Part 1 and convert them into end grain cutting boards. 

    **Closed-toe shoes are a requirement**

    **Please wear appropriate shop attire: 
    Pants preferred, no loose fitting garments, hair tied back if shoulder length or longer.**
    • 28 Sep 2015
    • 6:30 PM - 8:30 PM
    • MakerPlace Classroom
    • 10

    This class gives students a comprehensive introduction to 2D vector-based graphics using the popular CorelDraw software. This class will give students the basic knowledge to start creating 2D vector files for use with the laser cutters, the CNC router, and the CNC mill. In order to make the most of the CNC Router/Mill and Laser BOS classes, 2D Vector Graphics is recommended as a prerequisite for beginning users.

    MakerPlace PC laptops with the CorelDraw software installed will be available for students during the class.

    **Closed-toe shoes are required as the classroom is located through the shop**

Past events

27 Jul 2015 Intro to 3D Modeling
26 Jul 2015 Copper Bowl Forming Workshop
14 Jul 2015 BOS - CNC Fundamentals (Vcarve Pro)
12 Jul 2015 Screen Printing Basics
09 Jul 2015 Adult Arduino for Beginners (Adults only 17yrs+)
06 Jul 2015 Intro to 2D Vector Graphics with CorelDraw
01 Jul 2015 Copper Enameling Workshop
30 Jun 2015 BOS - CNC Fundamentals (Vcarve Pro)
28 Jun 2015 AOS- Advanced Screen Printing
27 Jun 2015 Intermediate Woodworking
24 Jun 2015 Adult Arduino for Beginners (Adults only 17yrs+)
22 Jun 2015 Intro to 2D Vector Graphics with CorelDraw
21 Jun 2015 Father's Day Special: Copper Bowl Forming Workshop
08 Jun 2015 Intro to 2D Vector Graphics with CorelDraw
01 Jun 2015 Intro to 3D Modeling
31 May 2015 Screen Printing Basics
30 May 2015 Build your own GPS enabled Quadcopter
27 May 2015 Copper Enameling Workshop
23 May 2015 Build your own GPS enabled Quadcopter
19 May 2015 BOS - CNC Fundamentals (Vcarve Pro)
11 May 2015 Intro to 2D Vector Graphics with CorelDraw
05 May 2015 BOS - CNC Fundamentals (Vcarve Pro)
04 May 2015 Intro to 3D Modeling
02 May 2015 Intermediate Woodworking
27 Apr 2015 Intro to 2D Vector Graphics with CorelDraw
22 Apr 2015 Copper Enameling Workshop
21 Apr 2015 BOS - CNC Fundamentals (Vcarve Pro)
19 Apr 2015 Adult Arduino for Beginners (Adults only 17yrs+)
18 Apr 2015 Copper Bowl Forming Workshop
13 Apr 2015 Intro to 2D Vector Graphics with CorelDraw
09 Apr 2015 Adult Arduino for Beginners (Adults only 17yrs+)
06 Apr 2015 Intro to 3D Modeling
05 Apr 2015 Screen Printing Basics
24 Mar 2015 BOS - CNC Fundamentals (Vcarve Pro)
23 Mar 2015 Intro to 3D Modeling
22 Mar 2015 AOS- Advanced Screen Printing
18 Mar 2015 Copper Enameling Workshop
16 Mar 2015 Intro to 2D Vector Graphics with CorelDraw
08 Mar 2015 Screen Printing Basics
01 Mar 2015 Introduction to Precious Metal Clay Using Bronze
24 Feb 2015 BOS - CNC Fundamentals (Vcarve Pro)
23 Feb 2015 Intro to 3D Modeling
22 Feb 2015 Copper Bowl Forming Workshop
21 Feb 2015 Intermediate Woodworking
16 Feb 2015 Intro to 2D Vector Graphics with CorelDraw
11 Feb 2015 Copper Enameling Workshop
10 Feb 2015 BOS - CNC Fundamentals (Vcarve Pro)
07 Feb 2015 Intermediate Woodworking
01 Feb 2015 Build Your Own Bicycle Frame Workshop
31 Jan 2015 Introduction to Precious Metal Clay Using Bronze
27 Jan 2015 BOS - CNC Fundamentals (Vcarve Pro)
26 Jan 2015 Intro to 3D Modeling
25 Jan 2015 AOS- Advanced Screen Printing
24 Jan 2015 Intermediate Woodworking
19 Jan 2015 Intro to 2D Vector Graphics with CorelDraw
18 Jan 2015 Copper Bowl Forming Workshop
16 Jan 2015 Adult Arduino for Beginners (Adults only 17yrs+)
13 Jan 2015 BOS - CNC Fundamentals (Vcarve Pro)
12 Jan 2015 Intro to 3D Modeling
11 Jan 2015 Screen Printing Basics
09 Jan 2015 Adult Arduino for Beginners (Adults only 17yrs+)
07 Jan 2015 Copper Enameling Workshop
05 Jan 2015 Intro to 2D Vector Graphics with CorelDraw
22 Dec 2014 Intro to 2D Vector Graphics with CorelDraw
21 Dec 2014 Copper Bowl Forming Workshop
17 Dec 2014 Holiday Cutting Boards
16 Dec 2014 BOS - CNC Fundamentals (Vcarve Pro)
15 Dec 2014 Intro to 3D Modeling
09 Dec 2014 Autodesk Fusion 360: Intermediate 3D Modeling
08 Dec 2014 Intro to 2D Vector Graphics with CorelDraw
07 Dec 2014 Etched Glass Plates
02 Dec 2014 BOS - CNC Fundamentals (Vcarve Pro)
01 Dec 2014 Intro to 3D Modeling
30 Nov 2014 Screen Printing Basics
24 Nov 2014 Intro to 2D Vector Graphics with CorelDraw
23 Nov 2014 Copper Bowl Forming Workshop
19 Nov 2014 Copper Enameling Workshop
19 Nov 2014 Adult Arduino for Beginners (Adults only 17yrs+)
19 Nov 2014 Intermediate Woodworking
18 Nov 2014 BOS - CNC Fundamentals (Vcarve Pro)
16 Nov 2014 AOS- Advanced Screen Printing
10 Nov 2014 Intro to 2D Vector Graphics with CorelDraw
03 Nov 2014 Intro to 3D Modeling
02 Nov 2014 Screen Printing Basics
22 Oct 2014 Adult Arduino for Beginners (Adults only 17yrs+)
21 Oct 2014 BOS - CNC Fundamentals (Vcarve Pro)
20 Oct 2014 Intro to 3D Modeling
19 Oct 2014 Copper Bowl Forming Workshop
15 Oct 2014 Copper Enameling Workshop
13 Oct 2014 Intro to 2D Vector Graphics with CorelDraw
12 Oct 2014 AOS- Advanced Screen Printing
08 Oct 2014 Intermediate Woodworking
28 Sep 2014 Introduction to Precious Metal Clay Using Bronze
24 Sep 2014 Intermediate Woodworking
23 Sep 2014 BOS - CNC Fundamentals (Vcarve Pro)
21 Sep 2014 Screen Printing Basics
17 Sep 2014 Meet up: Design to Manufacturing with Autodesk Fusion 360 Products
17 Sep 2014 Intermediate Woodworking
15 Sep 2014 Intro to 2D Vector Graphics with CorelDraw
14 Sep 2014 Copper Bowl Forming Workshop
10 Sep 2014 Copper Enameling Workshop
09 Sep 2014 BOS - CNC Fundamentals (Vcarve Pro)
08 Sep 2014 Intro to 3D Modeling
27 Aug 2014 Adult Arduino for Beginners (Adults only 17yrs+)
25 Aug 2014 Intro to 3D Modeling
23 Aug 2014 Jr-Duino: Arduino for Jr Makers (ages 11-17)
20 Aug 2014 Intermediate Woodworking
19 Aug 2014 BOS - CNC Fundamentals (Vcarve Pro)
18 Aug 2014 Intro to 2D Vector Graphics with CorelDraw
17 Aug 2014 Copper Bowl Forming Workshop
11 Aug 2014 Intro to 3D Modeling
04 Aug 2014 Intro to 2D Vector Graphics with CorelDraw
30 Jul 2014 Intermediate Woodworking
29 Jul 2014 BOS - CNC Fundamentals (Vcarve Pro)
28 Jul 2014 Intro to 3D Modeling
27 Jul 2014 Screen Printing Basics
26 Jul 2014 Adult Arduino for Beginners (Adults only 17yrs+)
21 Jul 2014 Intro to 2D Vector Graphics with CorelDraw
19 Jul 2014 Introduction to Precious Metal Clay Using Bronze
14 Jul 2014 Intro to 3D Modeling
02 Jul 2014 Copper Enameling Workshop
02 Jul 2014 Intermediate Woodworking
01 Jul 2014 BOS - CNC Fundamentals (Vcarve Pro)
30 Jun 2014 Intro to 3D Modeling
29 Jun 2014 Screen Printing Basics
29 Jun 2014 Copper Bowl Forming Workshop
23 Jun 2014 Intro to 2D Vector Graphics with CorelDraw
22 Jun 2014 AOS- Advanced Screen Printing
16 Jun 2014 Intro to 3D Modeling
07 Jun 2014 Adult Arduino for Beginners (Adults only 17yrs+)
03 Jun 2014 BOS- CNC Fundamentals (Vcarve Pro)
02 Jun 2014 Intro to 3D Modeling
01 Jun 2014 Screen Printing Basics
28 May 2014 Copper Enameling Workshop
24 May 2014 Introduction to Precious Metal Clay Using Bronze
19 May 2014 Intro to 3D Modeling
18 May 2014 Copper Bowl Forming Workshop
12 May 2014 Intro to 2D Vector Graphics with CorelDraw
10 May 2014 Adult Arduino for Beginners (Adults only 17yrs+)
06 May 2014 BOS- CNC Fundamentals (Vcarve Pro)
05 May 2014 Intro to 3D Modeling
04 May 2014 Screen Printing Basics
23 Apr 2014 Copper Enameling Workshop
22 Apr 2014 BOS- CNC Fundamentals (Vcarve Pro)
20 Apr 2014 Copper Bowl Forming Workshop
15 Apr 2014 Round Braided Wire Bracelets Workshop
14 Apr 2014 Intro to 2D Vector Graphics with CorelDraw
13 Apr 2014 Sewing for Jr Makers: A Easter Day Apron Class (ages 8-15 ONLY)
07 Apr 2014 Intro to 3D Modeling
06 Apr 2014 Screen Printing Basics
06 Apr 2014 Arduino for Beginners
05 Apr 2014 Round Braided Wire Bracelets Workshop
31 Mar 2014 Intro to 2D Vector Graphics with CorelDraw
30 Mar 2014 Introduction to Precious Metal Clay Using Bronze
30 Mar 2014 Jr-Duino: Arduino for Jr Makers (ages 11-17 ONLY)
24 Mar 2014 Intro to 3D Modeling
23 Mar 2014 AOS- Advanced Screen Printing
19 Mar 2014 Copper Enameling Workshop
16 Mar 2014 Copper Bowl Forming Workshop
14 Mar 2014 Industrial Silicone Molding Workshop
11 Mar 2014 BOS- CNC Fundamentals (Vcarve Pro)
10 Mar 2014 Intro to 3D Modeling
09 Mar 2014 Screen Printing Basics
03 Mar 2014 Intro to 2D Vector Graphics with CorelDraw
25 Feb 2014 BOS- CNC Fundamentals (Vcarve Pro)
24 Feb 2014 Intro to 3D Modeling
16 Feb 2014 Copper Bowl Forming Workshop
16 Feb 2014 Arduino for Beginners
12 Feb 2014 Copper Enameling Workshop
09 Feb 2014 Mini/Jr. Makers Hydro-Bot Exploration (ages 8-14 ONLY)
03 Feb 2014 Intro to 2D Vector Graphics with CorelDraw
01 Feb 2014 Build your own Quadcopter: for beginners
28 Jan 2014 BOS- CNC Fundamentals (Vcarve Pro)
27 Jan 2014 Intro to 3D Modeling
26 Jan 2014 Jr-Duino: Arduino for Jr Makers (ages 11-17 ONLY)
21 Jan 2014 Intermediate Arduino - Ultrasonic Distance
20 Jan 2014 Intro to 2D Vector Graphics with CorelDraw
19 Jan 2014 Copper Bowl Forming Workshop
19 Jan 2014 Arduino for Beginners
18 Jan 2014 Screen Printing Basics
15 Jan 2014 Jr. Duino RGB Color System (ages 11 and up)
14 Jan 2014 BOS- CNC Fundamentals (Vcarve Pro)
12 Jan 2014 Mini Makers Art Bot Build (Ages 8-12 ONLY)
12 Jan 2014 Build your own Quadcopter: for beginners
12 Jan 2014 Mini Makers Bristle Bot Rally Racing (Ages 8-12 ONLY)
08 Jan 2014 Copper Enameling Workshop
07 Jan 2014 Intermediate Arduino - Photoresistors
06 Jan 2014 Intro to 2D Vector Graphics with CorelDraw
05 Jan 2014 Jr-Duino: Arduino for Jr Makers (ages 11-17 ONLY)
16 Dec 2013 Intro to 3D Modeling
15 Dec 2013 Copper Bowl Forming Workshop
15 Dec 2013 Arduino for Beginners
13 Dec 2013 Beginning Fabrication Techniques applied to Sculpture
03 Dec 2013 BOS- CNC Fundamentals (Vcarve Pro)
02 Dec 2013 Intro to 2D Vector Graphics with CorelDraw
01 Dec 2013 Jr-Duino: Arduino for Jr Makers (ages 11-17 ONLY)
26 Nov 2013 Independent Studies on Sculpture by Fabrication
24 Nov 2013 Build Your Own Arudino Gingerbread (2 for 1 Special)
20 Nov 2013 Copper Enameling Workshop
19 Nov 2013 BOS- CNC Fundamentals (Vcarve Pro)
18 Nov 2013 Intro to 2D Vector Graphics with CorelDraw
17 Nov 2013 Screen Printing Basics
17 Nov 2013 Copper Bowl Forming Workshop
11 Nov 2013 Intro to 3D Modeling
04 Nov 2013 Intro to 2D Vector Graphics with CorelDraw
29 Oct 2013 BOS- CNC Fundamentals (Vcarve Pro)
28 Oct 2013 Intro to 3D Modeling
27 Oct 2013 Arduino for Beginners
21 Oct 2013 Intro to 2D Vector Graphics with CorelDraw
20 Oct 2013 Copper Bowl Forming Workshop
16 Oct 2013 Copper Enameling Workshop
15 Oct 2013 Advanced Fabrication Techniques applied to Sculpture
13 Oct 2013 Build Your Own Halloween Scare Bot
08 Oct 2013 BOS- CNC Fundamentals (Vcarve Pro)
30 Sep 2013 Intro to 3D Modeling
29 Sep 2013 Screen Printing Basics
25 Sep 2013 Intro to 2D Vector Graphics with CorelDraw
24 Sep 2013 BOS- CNC Fundamentals (Vcarve Pro)
22 Sep 2013 Copper Bowl Forming Workshop
17 Sep 2013 BOS- CNC Fundamentals (Vcarve Pro)
11 Sep 2013 Copper Enameling Workshop
09 Sep 2013 Intermediate Fabrication Techniques applied to Sculpture
08 Sep 2013 Arduino for Beginners
07 Sep 2013 Jr-Duino: Arduino for Jr Makers (ages 11-17 ONLY)
02 Sep 2013 Intro to 3D Modeling
01 Sep 2013 Screen Printing Basics
26 Aug 2013 Intro to 2D Vector Graphics with CorelDraw
25 Aug 2013 Build your own Quadcopter: for beginners
19 Aug 2013 Intro to 3D Modeling
18 Aug 2013 Copper Bowl Forming Workshop
13 Aug 2013 BOS- CNC Fundamentals (Vcarve Pro)
12 Aug 2013 Intro to 2D Vector Graphics with CorelDraw
07 Aug 2013 Copper Enameling Workshop
05 Aug 2013 Intro to 3D Modeling
05 Aug 2013 Fabrication Techniques applied to Sculpture
30 Jul 2013 CNC Fundamentals (Vcarve Pro)
16 Jul 2013 CNC Fundamentals (Vcarve Pro)
15 Jul 2013 Intro to 2D Vector Graphics with CorelDraw
14 Jul 2013 Screen Printing Basics
03 Jul 2013 Copper Enameling Workshop
02 Jul 2013 CNC Fundamentals (Vcarve Pro)
24 Jun 2013 Intro to 3D Modeling
22 Jun 2013 Copper Bowl Forming Workshop
18 Jun 2013 CNC Fundamentals (Vcarve Pro)
17 Jun 2013 Intro to 2D Vector Graphics with CorelDraw
16 Jun 2013 Screen Printing Basics
10 Jun 2013 Intro to 3D Modeling
10 Jun 2013 Intro to Foldforming Copper
04 Jun 2013 CNC Fundamentals (Vcarve Pro)
03 Jun 2013 Intro to 3D Modeling
29 May 2013 Copper Enameling Workshop
21 May 2013 CNC Fundamentals (Vcarve Pro)
20 May 2013 Intro to 2D Vector Graphics with CorelDraw
19 May 2013 Screen Printing Basics
07 May 2013 CNC Fundamentals (Vcarve Pro)
06 May 2013 Intro to 2D Vector Graphics with CorelDraw
05 May 2013 Screen Printing Basics
29 Apr 2013 Intro to 3D Modeling
29 Apr 2013 Intro to Foldforming Copper
27 Apr 2013 Copper Bowl Forming Workshop
24 Apr 2013 Copper Enameling Workshop
23 Apr 2013 CNC Fundamentals (Vcarve Pro)
22 Apr 2013 Basic Patina on Steel
15 Apr 2013 Intro to 3D Modeling
09 Apr 2013 CNC Fundamentals (Vcarve Pro)
08 Apr 2013 Intro to 2D Vector Graphics with CorelDraw
07 Apr 2013 Screen Printing Basics
01 Apr 2013 Intro to 3D Modeling
26 Mar 2013 CNC Fundamentals (Vcarve Pro)
25 Mar 2013 Intro to 2D Vector Graphics with CorelDraw
23 Mar 2013 Copper Bowl Forming Workshop
20 Mar 2013 Copper Enameling Workshop
18 Mar 2013 Intro to 3D Modeling
10 Mar 2013 Screen Printing Basics
03 Mar 2013 Color Theory
25 Feb 2013 Intro to 2D Vector Graphics with CorelDraw
23 Feb 2013 Copper Bowl Forming Workshop
19 Feb 2013 CNC Fundamentals (Vcarve Pro)
18 Feb 2013 Intro to 3D Modeling
13 Feb 2013 Copper Enameling Workshop
10 Feb 2013 Screen Printing Basics
05 Feb 2013 CNC Fundamentals (Vcarve Pro)
28 Jan 2013 Intro to 2D Vector Graphics with CorelDraw
22 Jan 2013 CNC Fundamentals (Vcarve Pro)
15 Jan 2013 Advanced CNC Topics; Machining with Cut3D
14 Jan 2013 Intro to 2D Vector Graphics with CorelDraw
09 Jan 2013 Copper Enameling Workshop
08 Jan 2013 CNC Fundamentals (Vcarve Pro)
07 Jan 2013 Intro to 3D Modeling
30 Dec 2012 Screen Printing Basics
17 Dec 2012 Intro to 2D Vector Graphics with CorelDraw
10 Dec 2012 Intro to 3D Modeling
04 Dec 2012 CNC Fundamentals (Vcarve Pro)
03 Dec 2012 Intro to 2D Vector Graphics with CorelDraw
28 Nov 2012 Copper Enameling Workshop
13 Nov 2012 CNC Fundamentals (Vcarve Pro)
04 Nov 2012 Screen Printing Basics
24 Oct 2012 Band Saw Box Making-Session 1
23 Oct 2012 CNC Fundamentals (Vcarve Pro)
14 Oct 2012 Screen Printing Basics
10 Oct 2012 Copper Enameling Workshop
08 Oct 2012 Intro to 2D Vector Graphics with CorelDraw
02 Oct 2012 CNC Fundamentals (Vcarve Pro)
25 Sep 2012 Advanced CNC Topics; Machining with Cut3D
23 Sep 2012 Screen Printing Basics
11 Sep 2012 Advanced CNC Topics; Machining with Cut3D
10 Sep 2012 Intro to 2D Vector Graphics with CorelDraw
05 Sep 2012 Copper Enameling Workshop
04 Sep 2012 CNC Fundamentals (Vcarve Pro)
02 Sep 2012 Screen Printing Basics
28 Aug 2012 Intro to 2D Vector Graphics with CorelDraw
20 Aug 2012 Intro to 3D Modeling
09 Aug 2012 Intro to 2D Vector Graphics with CorelDraw
26 Jul 2012 Intro to 2D Vector Graphics with CorelDraw
12 Jul 2012 Intro to 2D Vector Graphics with CorelDraw
09 Jul 2012 Intro to 3D Modeling
28 Jun 2012 Intro to 2D Vector Graphics with CorelDraw
18 Jun 2012 Intro to 3D Modeling
01 Jun 2012 Intro to 2D Vector Graphics with CorelDraw
15 May 2012 Intro to 2D Vector Graphics with CorelDraw
14 May 2012 Intro to 3D Modeling
01 May 2012 Intro to 2D Vector Graphics with CorelDraw
MakerPlace
619.225.7288    info@makerplace.com
1022 W. Morena Blvd. Ste. H  San Diego, Ca 92110
Powered by Wild Apricot Membership Software